The matt and elastic Nanten Comfort Plus is ideal for public construction, from nursing homes and hospital rooms to schools and kindergartens. The end result is seamless and smooth, and the surface can be decorated with colored flakes if desired. There are hundreds of color options, you can choose the most suitable shade for your destination from either Nanten own color chart or the RAL color chart.
Entrance, Entrance, Offices, Offices and break rooms, Offices and break rooms, Operating rooms, Patient rooms, Toilets, showers and dressing rooms, Toilets, showers and dressing rooms, Toilets, showers and dressing rooms, Toilets, showers and dressing rooms
Polyurethane
The substrate is pretreated by surface grinding or shot blasting. See substrate preparation instructions.
Prime with Nanten HM Bio Epoxy. The primer is applied 1-2 times depending on the porosity of the substrate.
Main compound is made with Nanten PU Flex Polyurethane coating, film thickness 1-3 mm. At this stage, colored flakes can be sown on the surface to enliven the surface.
Top coat with colored Nanten PU W2 paint or PU W2 lacquer 1-2 times.
To improve scratch resistance, we recommend that the last surface layer be treated with colorless Nanten PU W2 lacquer.
Pasi Heinonen
Project Sales
Architects & Designers
(West & North Finland)
+358 50 431 8267
pasi.heinonen@nanten.com
Project Sales
Finland
+358 50 374 4388
tomi.pennanen@nanten.com
Orders and technical support
+358 9 274 7970
nanten@nanten.com
Nanten
Teollisuustie 6
FIN-04300 Tuusula
Finland
+358 9 274 7970
nanten@nanten.com
Navigate
Navigate
Navigate
Connect with us